Termite Treatment Calculator

It estimates imidacloprid and fipronil requirements for pre-treatment and post-construction termite treatments — soil fills, vertical foundation treatment, and slabs or beams with drilled holes. Outputs include finished solution volume, concentrate required, bottle count, and approximate cost.

Use the chemical buttons to choose imidacloprid (Premise SC) or fipronil (Agenda 25 EC). Then select dosing based on US EPA or Indian manufacturer label standards. Adjust the wastage percentage to match how tightly controlled your site work will be.

Enter current market prices under each bottle size. The calculator will suggest the most efficient combination of sizes to minimise leftover chemical and reduce cost.

Use the output to understand the real cost of termite treatment before you negotiate with your pest control contractor. Most homeowners don't know these figures, which gives contractors room to overcharge.

Yes. It converts treatment area or linear length into finished solution volume and estimates dilution volume, chemical concentrate, bottle quantity, and approximate cost for imidacloprid or fipronil. You can map this to dose per litre planning.

Yes. The imidacloprid options estimate finished solution volume, concentrate required, and dose per litre planning based on the selected label dilution.

Yes. Enter bottle prices to see an estimated chemical cost and suggested purchase quantities. It does not include labour or equipment costs.

Yes. Premise is imidacloprid 30.5% and Agenda is fipronil 2.92%; both are available in India. This calculator estimates material cost for these termiticide dosing scenarios only.

Pay close attention to chemical concentration. As long as the active ingredient and label match a termite treatment use, you can. Do not use pesticides or formulations that merely contain similar chemicals. Bottle sizes also vary by brand, so enter prices and sizes carefully.

Dosing changes with termite load in the area, soil type (rocks and stone need more chemical), and a wastage allowance — 5% for very tight, well-controlled work; 8–10% for a realistic professional site allowance (recommended).

You can input areas or lengths in feet or metres and switch between them inside the calculator. Results are shown in litres and millilitres.

Finished solution is the total spray volume after dilution. The calculator uses your selected dilution to convert that into the exact concentrate required.

No. Bottle prices only change the recommended purchase quantity and total cost estimate. Dose and dilution remain based on label assumptions.

Yes. It supports horizontal soil treatment before construction, vertical foundation treatment, and post-construction drill-hole or injection-line estimates.

Yes, for the included chemicals only, using label dilutions from the manufacturer or US EPA standard dilution. You must factor labour costs, personal protective equipment, and other site expenses separately.

No. It is for planning and comparison only. Always follow product labels, local regulations, and professional guidance for final application decisions.